What safety issues do I need to be aware of during the drilling process?

During the drilling process, you should pay attention to the following safety issues:

1. Protective equipment:

Wear appropriate goggles to avoid getting hurt by flying debris. 

2. Hand position:

Keep your hands out of the area where the drill is rotating to prevent them from being caught in the drill.

3. Secure the workpiece:

The workpiece to be drilled must be firmly fixed, do not move around while drilling, or it will be in trouble.

4. Steady operation:

The body must be balanced, smooth operation of the drilling machine (drilling machine), do not suddenly come to a big movement caused by the loss of control.

5. Check the wiring:

Make sure the power line of the drill is not broken to avoid the danger of electric shock.

6. Environmental cleanup:

Timely clean up the debris produced by drilling, to avoid slipping and other accidents.

7. abnormal situation:

Always keep an eye on the operation status of the drilling machine, if there is abnormal sound, vibration or overheating, immediately stop the operation to check.

8. Cooling measures:

Adopt appropriate cooling measures according to the need, do not let the drill bit overheat and bring danger.

9. Operating space:

Ensure that there is enough operating space so that the drill bit does not collide with anything around it.

10. Compliance:

Operate the drill in strict accordance with the operating regulations.